Cessna 182Q N97467

Summary

On 28 March 2009 at about 00:15 local time, a Cessna 182Q registered N97467, operated by Cody W. Greaves, was involved in an accident near Sedona, Arizona, United States. One person was on board and nobody was injured. The aircraft was substantially damaged. The NTSB has published a probable cause for this accident; it is quoted in full below.

Date

28 March 2009 at 00:15

Classification

Accident

Location

Sedona, Arizona, United States

Nearest airport

Sedona (KSEZ)

Coordinates

34.8431, -111.7961

Aircraft

Cessna 182Q

Registration

N97467

Category

Airplane

Engines

1

Operator

Cody W. Greaves

Operating rule

Part 91: General Aviation

Purpose of flight

Positioning

Phase of flight

Not recorded

Route

Upland → Sedona

Aircraft damage

Substantial

Weather

VMC

Light

Day

NTSB number

WPR09LA168

Nobody was injured.

The pilot's failure to achieve the proper touchdown point during a full-stop landing attempt. Contributing to the accident were the pilot's failure to ensure that the aircraft was properly configured for landing, his not initiating a go-around, and a malfunction in one of the main landing gear braking systems.

Quoted verbatim from the NTSB record. This site does not paraphrase or interpret it.

Read the full NTSB narrative

While making a visual-flight-rules approach to a full-stop landing, the pilot was distracted by the thermal turbulence and inadvertently allowed his final approach to be high, long, and fast. He therefore executed a go-around. During the go-around the pilot did not feel the expected sinking of the airplane when he repositioned the cockpit flap control. Because he did not feel the sinking sensation, and because he had not visually confirmed the position of the flaps at any time since entering the pattern, the pilot incorrectly assumed that the flaps were not functioning properly. He therefore elected to make his second landing with the flaps still in the position they were at after the go-around (ultimately determined to be 10 percent). During the second approach he inadvertently landed about 80 percent of the way down the runway, and then attempted to stop the airplane with maximum braking. During the braking attempt, the brake on the left main gear did not provide any braking action. Before the pilot could get it stopped, the airplane departed the end of the runway, impacted a fence, and nosed over onto its back. A postaccident functionality test determined that the flaps were working properly. A Federal Aviation Administration inspector examined the left brake system and determined that the left pedal master cylinder was low on fluid. The examination also determined that very little braking or pedal resistance was present when the brake pedal was pushed toward its applied position, and there was likely very little, if any, left wheel braking action during the pilot's attempt to stop the airplane after landing long.

Quoted verbatim from the NTSB record.