Hughes 369 N8969F
11 September 2024 · Canton, Michigan, United States · No injuries
Summary
On 11 September 2024 at about 18:00 local time, a Hughes 369 registered N8969F, operated by Helicopter Powerline Services LLC, was involved in an accident near Canton, Michigan, United States. One person was on board and nobody was injured. The aircraft was substantially damaged. No probable cause has been published yet; this accident is still under investigation.
The record
- Date
- at 18:00
- Classification
- Accident
- Location
- Canton, Michigan, United States
- Coordinates
- 42.3112, -83.4647
- Aircraft
- Hughes 369
- Registration
- N8969F
- Category
- Helicopter
- Year built
- 1978
- Engines
- 1
- Operator
- Helicopter Powerline Services LLC
- Operating rule
- Part 133: Rotorcraft Ext. Load
- Purpose of flight
- External Load
- Phase of flight
- Not recorded
- Route
- Ann Arbor → Unknown
- Aircraft damage
- Substantial
- Weather
- VMC
- Light
- Day
- NTSB number
- CEN24LA358
People
Nobody was injured.
| On board | Died | Serious | Minor | Uninjured |
|---|---|---|---|---|
| 1 | 0 | 0 | 0 | 1 |
Probable cause
The NTSB has not published a probable cause for this record. The investigation is still open; a final report usually follows one to two years after the accident.
Nothing about the cause is stated here that is not in the source record.
Read the full NTSB narrative
On September 11, 2024, about 1400 eastern daylight time, a Hughes 369D helicopter, N8969F, sustained substantial damage when it was involved in an accident near Canton, Michigan. The commercial pilot was uninjured. The helicopter was operated as a Title 14 Code of Federal Regulations Part 133 rotorcraft external load flight. The purpose of the low-level flight was to support powerline maintenance work. The helicopter was operating from an off airport landing zone and conducting Class B cargo delivery to a powerline structure about 300 yards from the landing zone. While in flight, the pilot, who was stationed in the left seat, noticed an “intermittent and unusual vibration” with the helicopter. The pilot performed a precautionary landing to the landing zone, and he shut down the helicopter without further incident. The pilot performed a postflight inspection on the main rotor system and he observed a crack in the yellow main rotor blade (main rotor blades are typically marked with various colors to easily identify and reference each individual blade). The yellow main rotor blade, which was painted white, had sustained a chordwise crack outboard of the root fitting, near the doubler. The crack appeared to propagate from the blade’s trailing edge through both the upper and lower skins, stopping short of the leading-edge spar area. The helicopter sustained substantial damage to the yellow main rotor blade. There was no further damage sustained to the helicopter. The main rotor blades did not strike any birds, objects, or terrain during the accident flight. The yellow main rotor blade was removed from the helicopter, and it was transported to the NTSB Materials Laboratory, Washington, District of Columbia, for further examination. The yellow main rotor blade was manufactured by MD Helicopters (part number 369D21100-523 and serial number 009999-K364). At the time of the accident, the yellow main rotor bade had accumulated 3,289.9 hours and 12.4 hours had elapsed since the last inspection was performed on the yellow main rotor blade. At the time of the accident, the airframe, which was manufactured in 1978, had accumulated 18,318.8 hours. The helicopter was equipped with a Rolls-Royce 250-C20B turboshaft engine. The Federal Aviation Administration (FAA) Type Certificate for the helicopter, H3WE, is currently held by MD Helicopters, Mesa, Arizona. The FAA-approved MD Helicopters MD 500D (Model 369D) Rotorcraft Flight Manual discusses abnormal vibrations in the emergency procedures section and states: Indications: Sudden, unusual, or excessive vibrations occurring during flight. Conditions: The onset of unusual or excessive vibrations in the helicopter may be an indication of problems in the rotor or drive train systems. Procedures: Land as soon as possible. No further flights should be attempted until the cause of the vibration has been identified and corrected.
Quoted verbatim from the NTSB record.
Other Hughes 369 accidents
| Date | Aircraft | Location | Operator | Outcome | Died |
|---|---|---|---|---|---|
| 20 Feb 2024 | Hughes 369D | Hana, Hawaii, United States | Windward Aviation Inc | No injuries | - |
| 5 Nov 2024 | Hughes 369D | Waycross, Georgia, United States | Aviation Advantage LLC | Minor injuries | - |
| 10 May 2024 | Hughes 369 | Crestview, Florida, United States | Vertol Systems Co Inc | No injuries | - |
| 18 Mar 2024 | Hughes 369D | Belleville, West Virginia, United States | - | Serious injuries | - |
| 29 Jan 2024 | Hughes 369 | Erharting, Germany | - | Minor injuries | - |
| 5 Aug 2023 | Hughes 369 | Elberon, Virginia, United States | Haverfield International Inc | Serious injuries | - |
Other accidents in this area
| Date | Aircraft | Location | Operator | Outcome | Died |
|---|---|---|---|---|---|
| 31 Aug 2024 | Cessna 182D | Coopersville, Michigan, United States | - | Unknown | - |
| 21 Oct 2024 | Cessna 150 | Willis, Michigan, United States | - | Minor injuries | - |
| 12 Feb 2024 | Piper J3C-65 | South Lyon, Michigan, United States | - | No injuries | - |
| 10 Jun 2024 | Piper PA28 | Clinton, Michigan, United States | Solo Aviation Inc | Fatal | 1 |
| 19 Jul 2024 | Cessna 195A | Greenville, Michigan, United States | - | No injuries | - |
| 19 Jun 2024 | Cirrus SR20 | Litchfield, Michigan, United States | Board of Trustees of Western Michigan University | No injuries | - |